The iconic Apple logo is a symbol of reliability and innovation, but encountering a flashing Apple logo on your iPhone, iPad, or Apple Watch can be a cause for concern.

This unexpected issue may leave you wondering about the possible reasons behind it and, more importantly, how toresolve it. So you should know how to fix a flashing Apple Logoon an iPhone, iPad, or Apple Watch.

This comprehensive guide will explore the common causes of a flashing Apple logo and provide detailed solutions to help you get your device back to normal.

Why Are You Seeing A Screen With A Blinking Apple Logo?

Troubleshooting is essential if your iPhone is displaying a flickering Apple logo, turning on and off, or flashing repeatedly while charging. Power shortages are a possible reason, but it's not the only one.

A software glitch, like one in your iPhone, is a possibility. It's also possible that your charger is broken or malfunctioning. Your battery health declining or being in a deep discharge condition might also play a role. Damage to or compromise of the hardware, such as debris blocking the charging port, is another possible cause.

A software error brought on by an imperfect upgrade or downgrade is another possibility. It's also possible that a drop or encounter with water damaged internal components.

Identifying the actual reason may often be challenging, and finding a cure may need to be clarified, too. If your iPhone is acting up, knowing what to do about it is crucial. It's vital to have a firm grasp on the intricacies, components, and potential dangers of any potential answer.

How To Fix A Flashing Apple Logo On Your IPhone

The feasibility of a fix for you depends on the origin of the mistake. If, after connecting your iPhone to a computer via USB, you see the Apple logo flashing, try a different USB cable.

However, if the flashing Apple logo displays due to system issues and you need clarification on the reason, you may attempt the solutions provided below.

Force Restart The IPhone

A force restart is the first thing you should do since it is the simplest remedy. When your device is unresponsive, you may restart it by using a force restart, which won't erase any of your data. Thus, it is a typical repair for software issues on an iPhone, iPad, and iPod touch.

How To Restart An IPhone By Hand

The volume up and down buttons on an iPhone 8 or later should be swiftly pressed and released. Then, keep the side button pressed until the Apple logo appears.

To turn off the iPhone 7's ringer, press and hold the Sleep/Wake button and the volume-down button at the same time. If you see an Apple logo, you may safely let go of the buttons.

Press and hold the Sleep/Wake button and the Home button at the same time on an iPhone 6s or earlier. Wait for the Apple logo before letting go of the buttons.

Use Recovery Mode

If your iPhone freezes on the Apple logo due to an operating system problem, such as a failed update, entering recovery mode may assist. By booting your iPhone into recovery mode, you may install the most recent version of iOS without losing any of your information in the process.

If updating isn't working, restoring your iPhone to factory settings with the most recent iOS and firmware is another option.

By upgrading the OS on your iPhone, you may address the issue of the "iPhone flashing Apple logo" that is caused by software faults.

If you want to upgrade or restore your iPhone, you can find extensive instructions on how to do so in Apple's support document.

Use DFU Mode

You may restore iOS using either DFU (Device Firmware Update) mode or recovery mode. In contrast to Recovery Mode, which allows you to automatically install the most recent version of iOS on your iPhone, DFU mode gives you the option of installing whichever version of iOS you desire. So, DFU mode is the way to go if you want to roll back your iOS version.

You should note that entering DFU mode will wipe your data and perform a complete restoration of your iOS. Thus, be careful.

While it may seem daunting at first, the methods to enter DFU mode on an iPhone have been detailed in another instruction on how to activate a disabled iPhone. If you need help, look at that manual.

Use Third-Party Software

You may use EaseUS MobiUnlock, an iPhone unlock program if you'd like to avoid manually entering recovery mode or DFU mode to restore your iOS. You may unlock your iPhone without a password by reinstalling the firmware and iOS.

Therefore, it could also be helpful if you need to restore iOS to fix the "iPhone flashing Apple logo" problem. The "iPhone flashing Apple logo" problem may be resolved by restoring the iOS on your iPhone with a few easy steps. In addition to this problem, EaseUS MobiUnlock is useful when.

• The iPhone you are using is not working.
• You can't remember your iPhone passcode.
• The Apple logo is all that appears on your iPhone.
• When an iOS device is reset without a passcode.

How To Fix A Flashing Apple Logo On Your iPad

In this article, we'll go over several tried-and-true methods for fixing this issue, which can also be applied to the iPadOS 16 upgrade glitch.

Your iPad's battery must have at least a 50% charge before attempting any of the solutions outlined below. If it isn't, plug it into an outlet and charge it to that % before continuing.

Force Restart IPad

Rebooting by hand - Your iPad temporarily cuts electricity to its circuit before turning itself back on. When you do this, the iPad with the blinking Apple logo resets to factory settings, erasing any unnecessary data that might be causing the problem.

There are many ways to force restart iPads depending on whether or not they feature a Home button. Both approaches are detailed below for your convenience.

Hold the Home and Power keys down at the same time.

Force Restart an iPad With Home Button

• The iPad will resume and display the Apple logo shortly.
• Put both buttons down.
• Please be patient while your iPad boots normally.
• See whether the gadget functions as expected.

Force Restart An IPad Without The Home Button

• Put some pressure on the volume-up button and let go.
• Put the Volume Down button through a rapid push and release.
• Hold down the Sleep/Wake button for a few seconds.
• The iPad will resume and display the Apple logo shortly.
• To wake up, press the button again.
• Please be patient while your iPad boots normally.
• Verify that you are now able to use the iDevice usually and that the problem has been resolved.

Update IPad Using Recovery Mode

After a hard restart, if the Apple logo continues to flash on your iPad, you may update the iPad's firmware (iPadOS for iPad) by entering Recovery Mode. After updating to the latest iPad software, which is iPadOS 16 at the moment, you should no longer have any of the issues above. Here is how to update your iPad in Recovery Mode.

• Connect your iPad to a computer running the most up-to-date version of iTunes using the Lightning cable.
• Get iTunes going. Note: If you have access to a Mac machine, Mojave and older versions of macOS already have iTunes installed on them. If you're using macOS Catalina or later, however, you may open Finder and proceed.
• Use the procedure described in the previous section to initiate a force restart of your iPad, but don't release the button(s) when the Apple logo displays, regardless of whether your iPad has a Home button or not. Instead, hold them down until a cable symbol appears beside the PC or iTunes logo.
• Select Update when prompted by your PC.
• Please be patient while iTunes or Finder downloads and installs the iPadOS update and then reboots your iPad.
• Verify that you are now able to use the iPad usually and that the problem has been resolved.

Restore IPad Using Recovery Mode

When your iPad is in Recovery Mode, you may also choose to restore the operating system. iTunes will now download the most recent software file (iPadOS 16 for the time being) from the Apple server and install it on your iPad, erasing all of your data and resetting all of your settings to factory defaults, making your iPad run like new.

If the Apple logo doesn't stop flashing on your iPad, try to restore it using Recovery Mode.

• To enter Recovery Mode on your iPad, follow the instructions in the second solution.
• Select Restore from the iTunes menu.
• To begin the repair procedure, just follow the on-screen prompts.
• Wait until a new instance of iPadOS is installed on your iPad and the device reboots appropriately.
• Verify whether the problem no longer exists.

Restore IPad Using DFU Mode

Device Firmware Update is an abbreviation for this process. 'Restore' is the sole option that appears on the computer screen while an iPad is in DFU Mode. When you select 'Restore,' iTunes downloads and installs a new, clean, and error-free instance of iPadOS on your iDevice, thereby correcting any flaws that the current version of the operating system may have. By following these steps, iTunes will update your iPad to the current operating system (iPadOS 16).

As was said before, the procedure to put your iPad in DFU Mode may differ depending on the model. Nonetheless, details on both approaches may be found here.

IPad With Home Button

If you want to put your Home-button iPad into DFU Mode.

• Connect your iPad to a Windows or Macintosh computer running the most up-to-date version of iTunes (or Finder) via the Lightning Cable.
• Initiate iTunes (or, on a Mac, Finder).
• For three seconds, press and hold the Sleep/Wake button.
• Press and hold the Home button while continuing to hold the Sleep/Wake button.
• Keep holding down both the buttons for 10 seconds.
• Put the device to sleep by releasing the Sleep/Wake button, but keep the Home button down for a full five seconds.
• When the iPad screen goes black, release the Home button.
• iTunes will display a notification that an iPhone in DFU mode has been discovered.
• If a prompt is displayed on the computer, choose OK.
• Select the iPhone you want to restore, and then click Restore.
• Please be patient while your iPad downloads and installs a fresh copy of iPadOS and then reboots appropriately.
• Verify whether the problem no longer exists.

IPad Without Home Button

To enter DFU Mode on an iPad that doesn't have a Home button.

• Put some pressure on the volume-up button and let go.
• Put the Volume Down button through a rapid push and release.
• Hold down the Sleep/Wake button for a few seconds.
• Please be patient as the iPad's display turns dark.
• Press and hold the Volume Down button for 4 seconds while keeping your finger on the Sleep/Wake button.
• When the iPad's screen goes black, release the Sleep/Wake button but keep holding down Volume Down until you see the Recovery Mode prompt on your computer.
• Now, on your computer, choose OK.
• Select the iPhone you want to restore, and then click Restore.
• Please be patient while your iPad downloads and installs a brand new copy of iPadOS and then restarts appropriately.
• Verify whether the problem no longer exists.

If IPad Is Flashing Apple Logo While Charging

If the iPad's charging screen displays a blinking Apple logo, it signifies the battery isn't fully charged. Below, you'll find the answer to your problem.

• Allow your iPad to auto-start after being charged for at least an hour.
• Turning the iPad on may be necessary if it does not start up automatically.
• Verify whether the problem no longer exists.

Use A Third-Party Tool To Stop IPad From Flashing Apple Logo

After attempting the solutions above but still seeing the Apple logo flash on your iPad, you may turn to a third-party program made particularly for the task: iMobie AnyFix.

When it comes to mending Apple products, AnyFix stands out because of a number of unique capabilities.

Includes support for the latest iOS 16 and older iOS versions, as well as all iPhone models, including the iPhone 14.

• Recovery Mode may be entered and exited with a single click.
• Identifying and fixing over 130 unique system faults, such as "soft-bricked" Apple products, "iDevices stuck on the Apple logo," and many more.
• The ability to revert to an older version of iOS or iPad OS is a breeze.
• iDevices may now be reset without using iTunes or Finder.
• Resolving issues with iTunes backups and restores.

Fix Flashing Apple Logo On Apple Watch (7 Possible Solutions)

If you're facing the perplexing issue of a flashing Apple logo on your Apple Watch, don't fret. This problem can arise due to various reasons, and fortunately, there are several practical solutions to resolve it.

Check For Software Updates

Start with the basics: ensure your Apple Watch's software is up to date. Head to the Watch app on your paired iPhone, navigate to the My Watch tab and select General. Tap on Software Update to see if any updates are available. If so, install the latest software, as updates often contain bug fixes that can address the flashing Apple logo issue.

Force Restart Your Apple Watch

To force restart your Apple Watch, press and hold the Side button and the Home button at the same time. The Apple logo will return once the screen goes dark.

A few minutes at most. Release the buttons when the logo returns. After doing so, your Apple Watch will need a restart.

If you're having trouble restarting your Apple Watch normally, you should only use the force restart option. Furthermore, while your watch is charging, a forced reset will not take effect. It should not be linked to the power source.

Reset Settings On Apple Watch

If a force restart doesn't yield results, you can reset the settings on your Apple Watch. This won't erase your data but will revert system settings to their defaults. Go to the Settings app on your Apple Watch, tap on General, and select Reset. Choose "Reset All Settings" and confirm the action. After the reset, check if the flashing logo persists.

Charge Your Apple Watch

Low battery levels can sometimes trigger unusual behavior, including a flashing Apple logo. Connect your Apple Watch to its charger and ensure it's charging correctly. Let it charge for at least 30 minutes before attempting to restart it. In some cases, a depleted battery may have been the culprit behind the flashing logo.

Remove Third-Party Watch Faces

Customization is a great aspect of the Apple Watch, but certain third-party watch faces might be causing compatibility issues. Try switching to a built-in watch face and check if the flashing logo persists. If the problem is resolved, you should avoid using the problematic third-party face or ensure it's updated to the latest version.

Unpair And Pair Your Apple Watch

Unpairing and then pairing your Apple Watch can reset its connection with your iPhone, potentially resolving any communication issues causing the flashing logo. Open the Watch app on your iPhone, go to the My Watch tab, select your watch, and tap the "i" icon. Choose "Unpair Apple Watch," enter your Apple ID password, and confirm. After unpairing, follow the on-screen instructions to pair your Apple Watch again.

Contact Apple Support

If all else fails, it's time to seek assistance from Apple Support. Reach out to Apple's customer support through their website or visit an Apple Store. Explain the steps you've taken and the persistence of the flashing Apple logo. There might be an underlying hardware issue that requires professional attention.

Frequently Asked Questions

What Should You Do If Your IPhone Is Stuck On The Apple Logo And Blinking?

Charge Your iPhone - If your iPhone is showing the Apple logo, charge it to ensure it has enough juice. Hard Restart iPhone - Hold the power and volume down buttons until the Apple logo appears or vanishes.

Why Is Your IPhone Showing The Apple Logo But Not Turning On?

Software problems Most iPhones stuck on the Apple logo are due to software difficulties. Failed updates, outdated iOS versions, or jailbroken iPhones cause nine out of ten software faults.

Why Does My IPhone Keep Showing The Apple Logo And Turning Off And On?

Low battery power might cause your iPhone to not turn on beyond the Apple logo and then go off. Try putting in the charger, waiting until your iPhone screen turns dark, and then turning it on again.

Does A Force Restart On IPhone Delete Everything?

Apple calls a "force restart" another technique to reset your iPhone. Again, no crucial data will be lost. A hard reset is advised for unresponsive iPhones.

How To Do A Hard Reset IPad?

A hard reset may fix your problem if a power cycle fails. Hold the Sleep/Wake and Home buttons until the Apple logo appears and the iPad resets. Factory device resets are possible. Select Settings from the home screen to reset.

In The End

Addressing a flashing Apple logo on your Apple Watch demands a systematic approach, considering both software and hardware factors. The provided solutions offer a targeted strategy, from checking for updates to performing resets. For similar issues on your iPhone or iPad, refer to the comprehensive guide on fixing a flashing Apple logo.

These steps serve as a roadmap to restoring seamless functionality across Apple devices. How to fix a flashing Apple Logo on iPhone, iPad, and Apple Watch—we've covered it all to guide you toward a swift resolution and a return to the uninterrupted Apple experience you value.