If you've accidentally dropped your phone in water, don't panic! Water damage can be a frustrating and potentially costly experience, but there are steps you can take to salvage your device.

Let's go over how to get water out of your phoneusing various methods, including using rice, vacuuming, and using desiccants. We'll also answer some commonly asked questions about water damage and how toprevent it.

So, whether you've dropped your phone in the sink or spilled a drink on it, read on to learn how to get water out of your phone and potentially save it from permanent damage.

How To Get Water Out Of Your Phone In 10 Steps

Accidents happen, and dropping your phone in water is one of the most common ones. If you've accidentally submerged your phone in water, it's crucial to take immediate action to prevent permanent damage. Here are ten steps you can take to get water out of your phone:

What to Do If You Drop Your Phone In Water | How to Save a Wet Cell Phone

1. Turn off your phone immediately - The first thing you should do is turn off your phone immediately. Do not try to use it or turn it back on, as this can cause the water to spread and cause more damage.

2. Remove the case and SIM card- Take off the phone case and remove the SIM card if you can. This will allow air to circulate around the phone and speed up the drying process.

3. Wipe off excess water- Use a cloth or towel to gently wipe off any excess water from the outside of the phone. Do not use a hairdryer, as this can push water further into the phone.

4. Shake the phone- Gently shake the phone to remove any water that may be trapped in the ports or speakers.

5. Use a vacuum cleaner - If there is still water in the ports or speakers, use a vacuum cleaner to suck out the water. Be careful not to hold the vacuum too close to the phone, as this can cause damage.

6. Use a desiccant- A desiccant is a moisture-absorbing material that can help remove any remaining water from your phone. You can use silica gel packets, which are commonly found in shoeboxes or vitamin bottles. Place your phone in a sealable plastic bag with a few packets of silica gel and leave it for at least 24 hours.

7. Use uncooked rice- While using rice to dry out a phone is a controversial method, it can still work for some people. Place your phone in a sealable plastic bag with uncooked rice and leave it for at least 24 hours. Rice absorbs moisture and can help remove any remaining water from your phone.

8. Use a hairdryer- If you have no other options, you can use a hairdryer on low heat to help dry out your phone. Be careful not to use high heat, as this can cause damage to your phone.

9. Wait- After you've tried all of the above steps, give your phone time to dry out. Leave it in a dry, warm place for at least 24 hours before attempting to turn it back on.

10. Turn your phone back on- After you've waited for at least 24 hours, turn your phone back on. If it works, congratulations! If it doesn't, you may need to take it to a professional for repair or replacement.

Does Putting Phone In Rice Work?

Putting your phone in rice is a popular DIY method for drying out a water-damaged phone. The idea behind this method is that uncooked rice can absorb moisture and help remove any water from your phone. However, the effectiveness of this method is debatable.

If you decide to use rice to dry out your water-damaged phone, it's recommended to keep it in the rice for at least 24 hours. This will give the rice enough time to absorb any moisture that may be trapped inside your phone.

It's important to remember that whichever method you choose, patience is key. Give your phone enough time to dry out completely before attempting to turn it back on. Rushing the process can cause more damage and potentially render your phone unusable.

Why You Shouldn't Put Your iPhone In Rice

Can You Blow-Dry A Water-Damaged Phone?

Using a blow dryer to dry out a water-damaged phone is not recommended. While it may seem like a quick and easy solution, it can actually cause more harm than good.

The high heat from the blow dryer can cause the water to evaporate too quickly, which can damage the delicate components inside your phone. Additionally, the blow dryer can push the water deeper into your phone, making the damage worse.

If you absolutely have to use a blow dryer, make sure to set it on the lowest heat setting and keep it at least six inches away from your phone. However, it's best to avoid using a blow dryer altogether and stick to other methods, like using a desiccant or waiting for your phone to air dry.

How To Get Water Out Of Your Charging Port

If your phone's charging port has water in it, here's what you can do:

• Turn off your phone- The first thing you should do is turn off your phone to prevent any short circuits or further damage.
• Remove any excess water - Use a cloth or towel to gently wipe off any excess water from the outside of the charging port.
• Use a toothpick or paperclip- Use a toothpick or paperclip to carefully remove any visible water or debris from the charging port. Be careful not to damage the port or push any water deeper into your phone.
• Use a vacuum cleaner - If there is still water in the charging port, use a vacuum cleaner to suck out the water. Be careful not to hold the vacuum too close to the port, as this can cause damage.
• Use a desiccant- If there is still moisture in the charging port, you can use a desiccant to help remove the remaining water. Place your phone in a sealable plastic bag with a few packets of silica gel and leave it for at least 24 hours.
• Wait- After you've tried all of the above steps, give your phone time to dry out. Leave it in a dry, warm place for at least 24 hours before attempting to charge it again.

How To Get Water Out Of A Phone Speaker

If your phone's speaker has water in it, here's what you can do:

• Turn off your phone - The first thing you should do is turn off your phone to prevent any short circuits or further damage.
• Remove any excess water - Use a cloth or towel to gently wipe off any excess water from the outside of the speaker.
• Use a vacuum cleaner - Use a vacuum cleaner to suck out any visible water from the speaker. Be careful not to hold the vacuum too close to the speaker, as this can cause damage.
• Use a desiccant- If there is still water in the speaker, you can use a desiccant to help remove the remaining water. Place your phone in a sealable plastic bag with a few packets of silica gel and leave it for at least 24 hours.
• Play music or make a call- After you've waited for at least 24 hours, turn your phone back on and play music or make a call to test the speaker. If it still sounds muffled or distorted, you may need to take it to a professional for repair.

Remove Water From Speaker With Sound ( 100% Guaranteed )

People Also Ask

How To Get Water Out Of Your Headphone Jack?

Gently wipe off excess water with a cloth or towel, use a vacuum cleaner to remove visible water, use a desiccant to help remove remaining water, and wait for at least 24 hours before using headphones again.

How To Get Water Out Of Your Power Button?

Gently wipe off excess water with a cloth or towel, use a toothpick or paperclip to carefully remove visible water or debris, use a desiccant to help remove remaining water, and wait for at least 24 hours before using the power button again.

What To Do If Your Phone Won't Turn On After Getting Wet?

Dry your phone as much as possible, use a desiccant to help remove moisture, try charging your phone after 24 hours, and consider taking it to a professional for repair or replacing it if it's heavily damaged or old.

Can You Put A Wet Phone In The Freezer?

Putting a wet phone in the freezer is not recommended. While it may seem like a quick solution to drying out your phone, it can actually cause more damage. Freezing your phone can cause the water inside to expand and potentially damage the delicate components inside your phone. Instead, it's best to use other methods like vacuuming or using a desiccant to dry out your phone.

Conclusion

We all want to know what to do when it comes to how to get water out of your phone when it gets dropped in water and the first thing is to act quickly. Turn off your phone, remove any excess water, and use a combination of methods like vacuuming, using a desiccant, and waiting for your phone to dry out. It's best to avoid using a blow dryer or rice, as these methods can cause more harm than good.

It's also important to note that prevention is key when it comes to water damage. Consider investing in a waterproof phone case or keeping your phone away from water sources like pools or lakes. If you do accidentally drop your phone in water, remember to stay calm and take immediate action to prevent permanent damage.

Lastly, if your phone does not turn on or continues to have issues after trying these methods, it's best to take it to a professional for repair or replacement. They will have the knowledge and tools necessary to properly diagnose and fix any water damage your phone may have suffered.